Connecting the Modem
8
TJ 411 DOCSIS Cable Modem Installation Guide
Connecting the 10 Base-T Ethernet Cable
To connect the 10 Base-T Ethernet cable, follow these steps:
1.
Retrieve the 10 Base-T Ethernet cable from the box the modem came in.
Use Figure 1 on page 2 to identify the cable.
2.
Using Figure 6 as a guide, connect one end of the 10 Base-T Ethernet cable to
the RJ-45 Ethernet port on the back of the modem.
Figure 6
Connecting the Ethernet Cable to the Modem
3.
Connect the remaining end of the 10 Base-T Ethernet cable into the RJ-45
Ethernet port on the Network Interface Card (NIC) as shown in Figure 7.
NOTE:
Your computer may be a desktop model or a tower
model in which case it will look different than the illus-
tration shown in Figure 7.
4.
Proceed to “Starting the Modem” on page 12.
TERAYON DOCSIS MODEM
MODEL TJ 411 or TJ 411E
RJ-45 ETHERNET PORT
10 BASE-T
ETHERNET CABLE
TO ETHERNET PORT ON COMPUTER
NOTE
Summary of Contents for TJ 411
Page 20: ......