Connecting the Modem
Terayon TJ 700 Series DOCSIS Cable Modem Installation Guide
7
4.
Using Figure 2 and Figure 4 as guides, connect one end of a coax cable
(Cable “B”) to one of the OUT connectors on the cable splitter. Tighten the
connector with 7/16 inch wrench.
5.
Connect the remaining end of Cable “B” (TV Cable) to the same TV, Con-
verter Box, or VCR.
6.
Again, using Figure 2 and Figure 4 as guides, connect one end of coax Cable
“A” (Data) to the remaining OUT connector on the cable splitter. Tighten the
connection with a 7/16 inch wrench.
7.
Remove your new cable modem from its box and place it near your computer.
8.
Connect the remaining end of coax Cable “A” (Data) to the RF connector on
the modem as shown in Figure 5. Tighten the connection with a 7/16 wrench.
Figure 5
Connecting the RF Cable to the Modem
RF CONNECTOR
COAX CABLE
FROM CABLE SPLITTER
(CABLE "A")
TJ 700 SERIES
DOCSIS MODEM