Connecting the Modem
12
Terayon TJ 700 Series DOCSIS Cable Modem Installation Guide
Connecting the USB Cable
In order for your computer USB Interface to pass data back and forth to the
Terayon TJ 700 Series Modem, you must connect a USB cable to the modem USB
port and the USB port on the back of the computer.
To connect the USB cable, follow these steps:
1.
Retrieve the USB cable from the box the modem came in.
Use Figure 1 on page 2 to identify the cable. Notice that the USB cable has
two types of connectors, an “A” type, and a “B” type. Figure 10 identifies the
connector types.
Figure 10 USB Cable Connectors
2.
Using Figure 11 as a guide, insert the USB cable “B” connector into the USB
Serial port on the back of the TJ 700 Series modem.
Figure 11 Connecting the USB Cable
A CONNECTOR
B CONNECTOR
B CONNECTOR
USB CABLE
A CONNECTOR
USB SERIAL PORT
TJ 700 SERIES
DOCSIS MODEM
