MTLC User Manual
6
May 22, 2014
Figure 1-6 Mounting holes next to the HSMC connector
By doing so, this will ensure a rigid connection between the host board and the HSMC cable.
Install the copper pillars and nuts on the mounting holes as shown in
Figure 1-7.
Figure 1-7 Install copper pillars and nuts on the mounting hole
The HSMC cable should be already connected to the MTLC right out of the box. User only
needs to connect the HSMC cable to the HSMC connector on the host board as shown in
Figure 1-8.
Summary of Contents for MTLC
Page 1: ...1 ...
