Apollo Carrier Board
User Manual
25
www.terasic.com
September 22, 2020
Figure 4-3 Plug the Thunderbolt 3 cable to the Apollo Developer Kit
4.
When the Host PC connects to the Apollo Developer Kit with Thunderbolt 3 cable for the first
time. Windows should detect a Thunderbolt Device
and you will see a “New Thunderbolt
device has been connected” message appear in the bottom right corner of your screen as
shown in
. Click the message to approve the device.
Figure 4-4 New Thunderbolt devices have been attached message
Note that if this message does not appear, user can reconnect the Thunderbolt 3 cable
between the Apollo Developer Kit and Host PC or power off and on the Apollo Developer Kit. If
the message still doesn't appear, please refer the following link to solve:
http://www.terasic.com.tw/wiki/Apollo_S10_SoM_Setup_Thunderbolt 3_connection_win10
5.
A Thunderbolt Dialog window will appear as shown in
. Select “Always Connected”
and click OK button.
