Terasic Apollo Carrier Board, User Manual

Page: 5 / 55

Apollo Carrier Board
User Manual 4 www.terasic.com
September 22, 2020
1.2 Key Features
The following hardware is implemented on the Apollo Carrier board:

Carrier board for Apollo S10 SoM

Power input: 12V DC via PCIe 2x4 power connector

Provides 12V DC to S10 via SAMTEC 2x6 power connector

Signals connect to S10 via FMC+(J1) and FMC connectors

PCIe Gen3 x4 via Thunderbolt 3 (Type-C connector)

USB Downstream port via Thunderbolt 3 (Type-A connector)

Two QSFP28 connectors (40G Ethernet)

Clock generator to provide reference clock for transceiver IP

LED x4, Button x2, Switch x2

2x20 3.3V GPIO expansion header

HDMI-TX Port. Not function now, reserved for future
1.3 Block Diagram
Figure 1-2 shows the block diagram of the Apollo Carrier board.
Figure 1-2 Block Diagram of the Apollo Carrier Board