Caution
•
Do not touch the terminal for measuring the insulation resistance. An
ELECTRIC
SHOCK
is feared.
•
The Ring Blow becomes considerably hot during its operation. Take care not to
touch by your finger and body. A
BURN
is feared.
Maintenance
, Inspection
•
Take care, if you use a solvent or the like for cleaning the Ring Blow. A
POISONING
is feared. Further, the use of thinner or benzene may cause
discoloring or exfoliation of coating on the Ring Blow.
Disassembly,
•
The repair, disassembling and modification shall be executed only by experts. An
INJURY
due to the edge of Impeller or key groove, an
ELECTRIC SHOCK
or a
FIRE
is feared.
Repair,
Modification
Disposal
•
Handle the Ring Blow as a general industrial waste, when it is be disposed.
Package Opening and Product Verification ---------------------------
When the Ring Blow has been delivered, verify the following points.
Caution
1. Verify the top and the bottom of product and open the package.
Otherwise, an
INJURY
is feared.
2. Open the wooden frame package taking care of the used nails. Wear glove when
opening the wooden package. An
INJURY
is feared.
3. Verify if the delivered product is just the ordered one.
（
Check the output voltage, frequency, model etc. with the description on face plate.
）
An
INJURY
,
DAMAGE
or a
FIRE
is feared, if an incorrect product is used.
4. Verify if any part is damaged and if any bolt or nut is loosened during the transport.
4
