Teracue DCH-510P, User Manual

Page: 21 / 30

DCH-510P™
User Guide V1.1
21
6. Specification
DVB-S2 Demodulation
Input frequency range 950~2150MHz
Input level 25~-65dBm
Input impedance 75 Ω
Connector F Connector
Symbol rate 2~45MBauds for QPSK; 2~45MBauds for 8PSK
Rolling off factor 0.35 for QPSK; 0.35, 0.25, 0.2 for DVB-S2
Punctured rates DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9,8/10
DVB-S2 8PSK 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LNB Level 0, 13V, 18V adjustable
0/22K 0/22KHz selectable
DiSEqC DiSEqC 1.0
DVB-C QAM Demodulation
Tuner Input symbol rate 1~7Mbps(PAL), 1~6Mbps(NTSC)
Demodulation 16/32/64/128/256 QAM
Bandwidth 6MHz or 7MHz or 8MHz
Input frequency 48
～
860MHz
Input level -15
～
15dBmV
Input impedance 75 Ω , IEC female
DVB-T COFDM Demodulation
Demodulation QPSK, 16QAM, 64QAM
Bandwidth 6MHz/7MHz/8MHz
FFT mode 2K/8K
Guard interval 1/4, 1/8, 1/16, 1/32, off
FEC code rate 1/2, 2/3, 3/4, 5/6, 7/8
Input frequency 470-862MHz
（ ）
UHF ; 174-230MHz
（ ）
VHF
Input level -20
～
-70dBmV
Input impedance 75
Ω
, IEC Female
TS over IP I/O
Ethernet Connector RJ45, 10/100M
Max. bit rate 70Mbits/s
Protocol UDP/RTP, Support Multicast or Unicast
Multicast control protocol IGMPV2
Other I/O Interface / Common Interface
Type double-deck PCMCIA
Input Interface
Tuner IN 1×input, 1×loop through output
ASI OUT 2× BNC Female, 75 Ω
Output Interface
ASI OUT 2×2 BNC Female
，
75
Ω
SDI OUT 2×BNC Female
，
75
Ω
. Supports HD-SDI/SD-SDI,(one for back-
up)optional
HDMI 1x HDMI 1.3 interface
YPbPr 1
CVBS 1×RCA
，
1xBNC
AES/EBU 2x9-pins D-sub connector, AES/EBU and XRL audio output ports
Serial Port 1xRS-232 9-pin D-sub
Ethernet Connector ×RJ45, 10/100M, for network management; 1×RJ45, 10/100M, for TS
over 1 IP (optional)
Output Video format
SDI 1080ix60, 1080ix50, 576ix50, 480ix60, 1280x720Px 50, 1280x720Px 60,
1080ix59.94
HDMI 1080ix60, 1080ix50, 1280x720px60, 1280x720px5, 720x480p60,
720x576p50, 576ix50, 480ix60, 1080ix59.94