TCW220_R4.15
–
November 2022
Page 50
10.
Environment information
This equipment is intended for use in a Pollution Degree 2 environment, at altitudes up to 2000 meters.
When the controller is a part of a system, the other elements of the system shall comply with the EMC
requirements and shall be intended for use in the same ambient conditions.
11.
Safety
This device must not be used for medical, life-saving purposes or for any purpose where its failure could
cause serious injury or the loss of life.
To reduce the risk of fire
, only flexible stranded wire, with cross section 0.5mm² or larger for wiring of
digital and analog inputs and relay output of the device should be used.
To avoid electric shock and fire hazard, do not expose this product to liquids, rain, or moisture. Objects
filled with liquids, such as vases, should not be placed on this device.
There is a risk of overheating (damage) of the controller if recommended free spaces to adjacent devices
are not ensured. The joint part with external component shall have space for attachment/removal of
the cable after installation.
Teracom does not guarantee successful operation of the product if the product was used under
conditions deviating from the product specifications.
To ensure that the device works correctly follow the steps below:
•
ensure that the device is installed correctly, refer this user manual;
•
log into the devices via browser program;
•
make proper setup;
•
short the
“Din1” and “GND”
;
•
install sensor TSH2XX or TST1XX on the 1-Wire bus;
•
go to
“Monitoring page” of WEB interface –
proper parameters value should be displayed at
the same time flashing “STS” led should indicate the proper operation.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
In no event will Teracom Ltd. be responsible or liable for indirect or consequential damages resulting
from the use or application of this equipment.
12.
Maintenance
Upon completion of any service or repairs to the device or once per year, safety check must be
performed to determine that this product is in proper operating condition.
Clean the device only with dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not use a
magnetic/static cleaning device (dust remover) or any kind of abrasive materials to clean the device.
Summary of Contents for TCW220
Page 1: ......
Page 51: ...TCW220_R4 15 November 2022 Page 51 Appendix A Fig 1 Fig 2...
