TCW210-TH-R1.2 - January 2018
Page 7
If the network settings are correct, the login pop-up window will appear:
All TCW controllers connected to LAN can be easily found by the free tool “TCW discoverer”.
It is available for Win and Mac operating systems and can be downloaded from
www.teracomsystems.com.
7.
Web interface
The web interface allows configuration, monitoring, and control. All pages are UTF-8 encoded.
If the controller is properly addressing, login pop-up window appears.
Authorization data must be entered (by default username=admin, password=admin).
It is recommended to change the username and password to prevent unauthorized access to the
controller.
The controller supports a few active session.
7.1.
Monitoring
Monitoring page displays the current state of TCW210-TH. It has one data and four graphs tabs.
7.1.1.
Data
The current state of TCW210-TH can be monitored on this page.
All detected 1-Wire/MODBUR RTU sensors are shown in this section.
Detection is made either after power on or by button “Scan for new sensors”. All found
sensors are shown in ascending order refer their unique ID number.
For every sensor, there are a description, value, and ID information. The description length is
up to 15 characters. Default descriptions can be changed in “Setup-Conditions”.
Dual sensors (humidity-temperature) have the two parameters. For these sensors, Dew point
parameter is calculated automatically.
It is possible to lock sensors in a specific position. To do this all sensors should be added one
by one. After every addition, a new scan should be made and newly found sensor should be
locked in its position. If all sensors are locked, removing one “in the middle” will not change
the positions of other sensors after reset. This option is very useful when TCW210-TH is used
as a part of monitoring and control system managed either by SNMP or HTTP API commands.
Summary of Contents for TCW210-H
Page 1: ......
Page 38: ...TCW210 TH R1 2 January 2018 Page 37 Appendix A Fig 1...