Where: “PC”: frame header.
Sensor_ID
Counter = Counter IN - Counter OUT
Counter IN: number of people passing by from Left to Right
Counter OUT: number of people passing by from Right to Left
CRC_8 Byte
5.5.1.
Reset counters
RESET COUNTERS : 00 55 08 00 00 00 00 7C
This command will reset the counters for both presence detection and bidirectional
people traffic detection modes.
5.5.2.
Parameters Command
PARAMETERS FRAMES (BINARY) : 00 61 01 E7
This command provides users with all parameter values in binary form and returns the
following frames:
6. General Remarks
●
If the sensor is disconnected/powered down the counters are automatically
reset.
Copyright
©
Terabee 2021
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
19/19
“BP”
Maximum_Thresholds (2 bytes)
Minimum_Thresholds (2 bytes)
