Figure 3 - TeraRanger Evo Swipe Plus external dimensions, USB backboard
The USB Backboard includes two holes for mounting the sensor using standard M2
screws. The following methods can be used to mount the TeraRanger Evo Swipe Plus
sensor:
1-
Front-panel mount using the M2 screws
2-
Back-panel mount using the 2mm ledge on the front side of the sensor
Figure 4 illustrates the two different mount methods. The first solution allows for easy
surface attachment and rapid evaluation of the sensor. The second provides a more
discreet installation and supports design-in projects by installing the sensor behind a
surface (e.g panel), ideally with 2mm thickness.
Copyright
©
Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
8/29
