●
To launch the GUI double click on the icon “EvoSwipePlus” on the Desktop
●
To launch with terminal information, right click on the icon and choose “Open file
location”.
●
Open a cmd terminal there and type the command: “cd ..” and then
Python\python.exe pkgs\main.py
5.3.
Graphical User Interface (GUI)
The GUI allows you to:
●
Set up the parameters for the different modes of Evo Swipe Plus sensor
●
Bidirectional People Traffic Count
●
Presence Count
●
Engagement Trigger
●
Swipe (Swipe: Last Gesture)
●
Validation (Validation Status)
●
Test in near real-time the behavior of Evo Swipe Plus sensor and report the
status and counts related to its different modes
Important:
Once you update the parameters through the GUI (e.g. Presence Detection Mode or
thresholds with the sliders), these parameters are automatically pushed to the
TeraRanger Evo Swipe Plus sensor
You can read the details of the GUI on Figure 11 below.
Copyright
©
Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
20/29
