To modify these parameters and change distances, the user can either use the slider or
input exact values in the corresponding number field. The silo illustration (right side)
provides a visual example of the 3 parameter setup.
Important. Please note that the Terabee Configuration GUI is only used as a means
to configure the device for operation. The software is not intended to provide any
recommendations on most suitable mounting possibilities, or other information
related to the device physical installation in the silo or tank.
SAVE TO DEVICE
Once parameters have been configured, click on SAVE TO DEVICE (bottom left) to register
and store configured network parameters to your Terabee device. A dialog window will
appear to indicate successful parameter registration and also list these for confirmation.
About tab
This section provides generic information about the Terabee device and the current device
firmware, software (GUI) version.
A summary of all CONFIGURED DEVICE PARAMETERS is also available. Parameters will be
updated in real-time as soon as these are changed in the corresponding NETWORK and
APPLICATION tabs and fields.
Copyright © Terabee 2021
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
25/36
