Immediately after connecting, a distance data stream will be available on the left side of
the Home tab, showing real-time measurements from sensor to target (in millimeters).
Please note that fast streaming of distance data from the device is only possible
via the USB interface, and not available for communication via LoRa protocol.
Users can extract measured distance data in a txt file format, by clicking on START
RECORDING. Select a preferred location for the file and click SAVE. When enough data is
gathered, click on STOP RECORDING. Below is an example of distance measurements
extracted on a Txt file from the Terabee Configuration GUI.
At any point, the user can disconnect the device by clicking DISCONNECT DEVICE.
Copyright © Terabee 2021
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
19/36
