When choosing a place for mounting, please consider the following recommendations:
●
Terabee 3Dcam 80x60 is developed for use in indoor environments, using the
camera in outdoor conditions (in direct sunlight) can reduce its performance
●
Choose a place which is in accordance with the optical constraints listed below
●
Mounting close to sources of heat or strong electromagnetic fields can decrease
the sensing performance
●
Do not mount anything directly in front of the camera
●
It is better to avoid having other sources of continuous wave or modulated IR
light close to the sensor
●
Please consider that dust, dirt and condensation can affect the sensor
performance.
●
It is not advised to add an additional cover in front of the camera - please note
that this may reduce its performance
Please consult figure 6 for correct camera position when mounting to a surface or
hand-testing the device. This also translates into a correctly oriented and visualized data
output (depth image).
Figure 6. Correct camera position
Copyright
©
Terabee 2019
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
8/16
