Marquee™ Point-to-Point Series User Guide
Figure 2.1 – Marquee LEDs
(a) Flat Panel (FP) Version
(b) Ruggedized (EX) Version
:
d with all-weather electrical tape, Permagum, or
he Marque
mounting bracket (A) that is secured to the pole with a
Figure 2.2 – Marquee FP Mounting Hardware
N-Type
Connector
for External
Antenna
2.5
Hardware Installation – FP Enclosure
NOTE
All connectors must be properly water-proofe
equivalent. Do not use Silicon glue.
e FP unit is installed by using a pole
T
pivot adaptor bracket (B), a pole clamp (C), and a U-bolt (D). Figure 2.2 shows the hardware provided to
mount the Marquee FP unit.
Pole
Clamp (C)
U-Bolt (D)
Pivot Adaptor
Bracket (B)
Pole Mounting
Bracket (A)
he integrated antenna can be mounted either vertically or horizontally polarized. The label located on
T
the back of the unit contains an arrow indicating the antenna’s polarization (see Figures 2.3a and b).
Please note that both ends of the link must use the same polarization. Be aware that most omni
antennas are vertically polarized and if the Marquee FP is aimed at one, it must be installed vertically
polarized, i.e., with the polarization arrow up and down.
Version 1.2
Page 4
February 2005
