TER SRL MIG175GD, User Manual

Page: 17 / 37

USER MANUAL
-
15
-
YF-74L
A2
PANEL FUNCTION ILLUSTRATION
Front panel instruction
：
1. STICK/LIFT TIG/MIG switch key
2. WIRE CHECK
3. VRD/2T/4Tswitch key
4. Data selection key (effective under MIG mode)
5. Multifunctional data adjusting knob
（
coarse adjustment by pressing the knob and turning it: big regulating rate
and high speed; fine adjustment only by turning the knob: small regulating rate and low speed
）
6. Multifunctional data display
Polarity conversion joint
This machine has the polarity conversion; There are positive output terminal and negative output terminal between
wire feeder and wire spool; When use solid wire with gas protection, torch socket should be connected to the positive
output terminal, ground cable should be connected to the negative output terminal; When use flux-cored wire, the two
connected cable should be exchanged.