Operation
LAP-TEQ Elevation
19
5
Operation
5.1
Power on/off
Notice
Make sure that the reference point for the measurement is
correct. If the deviation to perpendicular is so large that the
laser detects an object, for example, this will result in an
incorrect measurement.
Check the condition of the device:
► Check for visible defects.
► Check to make sure that all parts of the device are firmly mounted.
Warning!
Danger of eye injuries from laser beams!
If the laser beam hits the eyes via optical devices, this can
result in irreparable damage.
► Never look into the laser or direct the laser beam onto
reflecting surfaces!
► Make sure that no one is within the effective range of the laser.
► Power on: Press the “Power” button on the display unit for about 3
seconds.
If the system has started up correctly, the red laser lights up and the current
distance is displayed. If a LAP-TEQ Sensor PLUS is connected in addition, the
current angle reading will be displayed simultaneously.
The measurement is refreshed continuously; in unfavourable conditions (cp.
Observe ambient conditions on page 25 ) this can take up to 3 seconds.
► Power off: Press the “Power” button on the display unit again.
