background image

19

replaCIng the Internal CloCk battery

This projector has an internal clock that uses a battery. When the clock of the network 

function does not work correctly, please try replacing 

the battery.

hItaChI MaXell

, part number 

Cr2032

 or

 Cr2032h

.

1.  Turn off the projector, and unplug the power cord. 

Allow the projector to cool sufficiently.

2.  After the projector has cooled adequately, slowly 

turn over the projector so that the bottom is facing.

3.  Turn the battery cover in the direction indicated 

“OPEN” using a coin or the like, and pick the cover 

up to remove it.

4.  Pry up the battery using a flathead screwdriver or the 

like to take it out. While prying it up, lightly put a finger 

on the battery, since it may pop out of the holder.

5.  Replace the battery with a new 

hItaChI MaXell

Part No. 

Cr2032

 or 

Cr2032h

. Slide the battery 

under the plastic claw and push it into the holder 

until it clicks.

6.  Replace the battery cover in place, then turn it in the 

direction indicated “CLOSE”.

NOTE

 

n

 The internal clock will be initialized by removing the battery. 

WARNING

n

  Be careful handling a battery, as a battery may cause explosion, cracking or leakage, which may 

result in a fire, an injury and environment pollution.

n

  Only use the specified and perfect battery. Do not use a battery with damage, such as a scratch, 

a dent, rust or leakage.

n

  When replacing a battery, always replace it with a new one.

n

  If a battery leaks, wipe the leakage out well with a waste cloth. If the leakage adheres to your 

body, immediately rinse it well with water. If a battery leaks in the battery holder, replace the 

batteries after wiping the leakage.

n

  Make sure the plus and minus terminals are correctly aligned when loading a battery.

n

  Do not work on a battery; for example recharging or soldering.

n

  Keep a battery in a dark, cool and dry place. Never expose a battery to a fire or water.

n

  Keep a battery away from children and pets. If swallowed, consult a physician immediately for 

emergency treatment.

n

  Obey the local laws on disposing a battery.

Summary of Contents for TEQ-W6989M






















Reviews: