12
adjUStIng the projeCtor’S elevator
When the projector surface is uneven, use the
elevator feet to adjust the projector horizontally.
The feet can also adjust the screen angle by,
elevating the front side of the projector within 14
degrees. This projector has 2 elevator feet and 2
elevator buttons. An elevator foot can be adjusted
by pushing the elevator button on the same side.
1. Hold the projector and push the elevator buttons to loosen the feet.
2. Position the front side of the projector to the desired height.
3. Release the elevator buttons to lock the feet.
4. After making sure the elevator feet are locked, put the projector down gently.
5. If necessary, the elevator feet can be manually twisted to make more precise
adjustments. Hold the projector when twisting the feet.
CAUTION
n
Do not handle the elevator buttons without holding the projector, since the projector may
drop down.
n
Do not tilt the projector more than 14 degrees. A tilt exceeding the restriction may shorten the
lifetime of the projector itself, or cause a malfunction.
To loosen an elevator foot, push the
elevator button on the same side.
Twist the foot, to finely adjust.
