Teo IP Phone 9160 Installation Instructions
Page 20
13-280142 Rev. B
M
M
u
u
l
l
t
t
i
i
f
f
u
u
n
n
c
c
t
t
i
i
o
o
n
n
K
K
e
e
y
y
s
s
Multifunction keys can be configured for a variety of functions described below. On the IP
Phone 9160, keys are shown on five screens with 28 keys per screen, for a total of 140 keys.
Blue dots above the keys indicate the current screen. Swipe left or right to select a different
screen.
You can allow the user to customize keys on a per-key basis locally on the phone. Keys that
are designated “SET AT PHONE” can be configured by the user at the phone, and will not
be overwritten by a configuration update.
Note: Do not set any keys to “SET AT PHONE” if the phone is configured for hot desking. Hot
desking overwrites all key assignments.
These key functions are available:
•
LINE – first appearance of the primary line (extension number). The key also
indicates line appearance status.
•
ADDITIONAL LINE – additional appearances of the primary line; LED indicator
shows line appearance status. LINE and ADDITIONAL LINE keys for a call
appearance must be consecutive. The ADDITIONAL LINE option is available only if
the preceding key is configured for a line appearance.
•
DSS/BLF – initiates a voice call or picks up a ringing call to an assigned extension.
The key shows the presence status of the assigned extension.
•
DSS/BLF (VIDEO) – initiates a video call or picks up a ringing call to an assigned
extension. The key shows the presence status of the assigned extension.
•
PRESENCE – allows user to set their presence status. The key shows the current
presence status of the user extension.
•
END – ends a call.
•
LOCK – locks the phone to prevent unauthorized use, except for emergency calls.
•
REDIAL – dials the most recently-dialed number.
•
SET AT PHONE – key is configured locally at the phone by the user. A configuration
update will not override the user’s settings
(not compatible with hot desking)
.
•
SPEED DIAL – initiates a voice call to a preconfigured number.
•
SPEED DIAL (VIDEO) – initiates a video call to a preconfigured number.
•
VOICEMAIL – initiates a call to the voicemail system.
•
MULTICAST – initiates a multicast page.
•
Blank – key is unused and cleared at the phone.
