Select F3=0 for the temperature to read in Centigrade. F3=1 for Fahrenheit.
3. Select
°F
or
°C
readout
The filter counter is set in one month intervals with a range from 0-12 months. For example, select
“F6=3”, it means 3*30=90 days, “FILTER” icon will be shown, which reminds you to change the filter
.
Select “F6=0 to” disable the filter change function.
9. Mount Thermostat & Battery Installation
In Step 3, if there is any resistance felt when connecting the pins, Do Not force it. Move the
display slightly and realign.
Step 1: Align the inner snaps with
the top part of the thermostat.
Step 2: Hang the two hooks of the
front part at 30° right to the snaps.
Step 3: Press the lower part front of the
display panel to complete the installation.
6. Select filter change counter
Select “F8=0”, the backlight will turn off in 5 seconds. Select “F8=1” , backlight will be always on.
With the power off, hold “F” button for 5 seconds, Symbol “dE” will be displayed in thr temperature area
then press “RUN”key to confirm and exit.
High quality alkaline batteries are recommended. Rechargeable batteries or low quality batteries
may not have a 1-year life span.
TENZA
TENZA
TENZA
The thermostat has an intelligent recovery function that brings your room temperature at exactly the
pre-set time by turning on the Heating earlier. Select “F7=1” to activate the intelligent recovery
function, select “F7=0” to deactivate the intelligent recovery function. The default setting is “0”.
