8. And then you will be prompted to download the ActiveX control.
Checking the network settings
When the computer with right connection to the camera and installation of the software in
the LAN, the administrator will also need to finish the network setting in the page "System
Setup
→
Network
→
TCP/IP" to complete the network settings .
If there are more than 2pcs
cameras connected in the same LAN without the DHCP server,
(factory default IP address of the all MINI camera series are: 192.168.1.111) which will
cause IP address conflicts, leading to wrong identification and searching.
Please refer to “System Setup
→
Network
→
TCP/IP" to configure: Re-assigned legal IP
address, subnet mask, gateway IP and DNS. Making sure the all ip address of the
cameras are different. If you do not know how to do, please ask the webmaster or ISP for
the details. Once the settings are incorrect and can not be searched, please check “fault
diagnosis” to restore to factory defaults
With a password to prevent unauthorized access.
NOTE: It is recommended that you change the admin password in order to avoid
unauthorized access to the camera.
Modify user information
1. User name admin is default Administrator user name, it shouldn’t be Deleted. You just
should change the password.
2. This camera allows the users to add six users and passwords under different limits of
authority, one is administrator, and one is general user. The general users assigned by the
administrator are not allowed to enter the system setting interface. They can only be
permitted to enter the picture viewing interface.
3. Click Add, you can add a new user, Click Delete, you can delete a user.
4. As the number of simultaneously users increase, the overall performance will decrease.
This is dependant on the Network bandwidth.
Main page
Inputting the assigned IP address (or URL) of the camera on the Web Browser . Take
192.168. 2.111 as an example. The below dialog will appear. Input the correct username
(the default is
admin
, in lowercase) and password (the default is
admin
, in lowercase).
You are allowed to enter the picture viewing interface or the system setting interface.
The general users assigned by the administrator are not allowed to enter the system
setting interface. They can only be permitted to enter the picture viewing interface.
