3.Installation instructions
(1)Surface Installation
Put the camera on the desk flat, and make sure the camera in
level. If want to put the camera on oblique surface, please m-
ake sure the angle of inclination less than 15 degree for ensu-
re camera pan and tilt working in normal operation.
(2) Tripod Mount Installation
(3) Ceiling Mount Installation
Twist the tripod’s screw on the camera tripod hole, then the
tripod could be installed on the bottom of camera. The tripod
screw must fit below.
>
_
15°
_
<
15°
Screw specification 1/4-20UNC
6mm
4
1.Fix the upper bracket to the ceiling
3 Close the upper and lower brackets
2.Fix the lower bracket to the ceiling
lower bracket
Ceiling
Upper bracket
Ceiling
4.Lock the upper and lower brackets
Screw hole
Screw hole
Screw hole
