20
13. SETTING
UP
AND
USING THE PERFECT
PFE
13.1. INSTALLATION
OF
BATTERIES
1) Remove belt clip by sliding down.
2) Remove battery cover by pulling on
tag.
3) Insert batteries.
Ensure that the batteries are inserted
the right way as shown in battery
compartment and that the ribbon is
behind them.
4) Replace battery cover and belt clip.
When
the
batteries
are
running low, a low battery
indicator will show on the
screen and it is important to change the
batteries as soon as possible.
Rechargeable batteries
The unit will work with rechargeable
batteries, but the display may appear
dim.
Storage
Remove batteries from your
perfect
PFE
if the unit is unlikely to be used for
a long period.
Some types of batteries
may leak corrosive fluid.
Battery Life
Batteries should last about 18 hours at
full power.
Unused batteries have a nominal shelf
life of 3 years, but will usually last longer
than this.
Battery Warnings
Do
NOT
pierce,
open,
disassemble, or use in a humid
and/or corrosive environment.
Do
NOT
expose
to
temperatures over 60°C(140F).
Do
NOT
put,
store
or
leave near sources of heat, in
direct strong sunlight, in a high
temperature location, in a pressurized
container or in a microwave oven.
Do NOT
immerse in water or
sea water, or get wet.
Do NOT
short-circuit.
Do NOT
connect the device
unless the battery cover is in
place.
If battery leakage occurs and comes in
contact with the skin or eyes, wash
thoroughly with lots of water.
Keep batteries out of the reach of small
children.
Summary of Contents for Perfect PFE
Page 1: ...0 INSTRUCTIONS FOR USE READ CAREFULLY BEFORE USE...
Page 34: ...33 NOTES...
