29
Note:
1) If there is no operation in the panel for 3 minutes in the waiting state, the
device will be turned off automatically.
2) In shutdown state, hold down the Channel 2 [
▼] first and then press [
] at the
same time to restore factory parameter settings.
4.12 Low Battery Indicator
When the low power indicator flashes, the device will be turned off automatically. The
battery should be replaced with a new one as soon as possible. However, the unit may
continue lo operate for a few more hours depends on the setting intensity level
.
5. PROGRAM
Mode
Program Modulation
Method
Frequency
Pulse
Width
Treat time
TENS
B
Burst
05-5Hz
50-300 uS
1-60 min, cont
N
Continuous
1-150Hz
50-300uS
1-60 min, cont
M
Pulse width
modulation
1-150Hz
50-300us
1-60 min, cont
M1
Frequency
modulation
1-150Hz
50-300us
1-60 min, cont
EMS
S
Synchronous
mode
1-150Hz
50-300us
1-60 min, cont
A
Asynchronous
mode
I
– I50 Hz
50-300us
1-60 min, cont
D
Delay mode
1-1 50Hz
50-300us
1-60 min, cont
IF
P1
Frequency
modulation
4kHz
4001 -4010Hz
I 25uS
1-60 min, cont
P2
Frequency
modulation
4kHz
4001--5150Hz
I 25uS
1-60 min, cont
P3
Frequency
modulation
4kHz
4080- 4150Hz
I 25uS
1-60 min, cont
P4
Frequency
modulation
4kHz
4001 -4150Hz
I 25uS
1-60 min, cont
MIC
P1
Continuous
1-150Hz
2-200mS
1-60 min, cont
P2
Frequency
modulation
1-150Hz
2-200 mS
1-60 min, cont
P3
Frequency
modulation
1-150Hz
2-200 mS
1-60 min, cont
