24
4) Set Pulse Width
Pulse Width is adjustable from 50 uS to 300 uS.
Press [S] button cycle to enter this menu, then press [
▲] or [▼] buttons to adjust
the setting.
5) Set Pulse Rate
Pulse rate is adjustable from 1 Hz to 150 Hz (0.5 Hz to 5Hz for Burst).
Press [S] button cycle to enter this menu, and then press [
▲] or [▼] button to
adjust the setting.
4.7.2 EMS
Setting
Press the [S] button to enter the setting state. Pressing the [S] button repeatedly cycles
through the available options.
The settings can be adjusted according to the following steps
1) Set the Therapeutic Program
There are 3 programs in EMS therapeutic mode available -Delay, Synchronous
and Alternate.
The program can be selected by pressing the
[▲] and [▼] buttons. When you
select a program, the box around the symbol for that program will flash.
2) Set Timer
Press [S] button cycle to enter this setting. The treatment time is adjustable from
1 to 60 minutes or Continuous. Press [
▲] or [▼] button to adjust setting. To
select Continuous, when the display shows 60 minutes press [
▲] button.
Stimulation output will be shut off when time is up.
3) Set Pulse Width
The pulse width determines the length of time each electrical pulse is applied
through the skin, which affects the strength and sensation of the stimulation.
Press [S] button cycle to enter this setting. The pulse width is adjustable from 50
to 300 uS.
Press [
▲] or [▼] buttons to adjust the setting.
