TensCare BEAUTYMAX, Instructions For Use Manual, Page: 34 / 38

33
18. GENERAL SPECIFICATION
Waveform Asymmetrical Bi-Phasic
Amplitude
FACE over 500 Ohm load
Other programmes over 1
kOhm load
40 mA zero to peak +ve in 40 steps.
90 mA zero to peak +ve in 90 steps +/- 10%
Modified constant charge control
Output plug Fully shielded: touch proof
Channels Dual channel
Batteries 2 x AA alkaline (two AA batteries)
Weight 75 g without batteries
Dimensions 120 x 60 x 20 mm
Safety Classification Internal power source.
Designed for continuous use.
No special moisture protection.
Environmental specifications:
Operating:
Storage:
Temperature range: 5 to 40
⁰
C
Humidity: 15 to 93% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
Temperature range: -25 to +70
⁰
C
Humidity: Up to 93% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
TYPE BF
APPLIED PART
Equipment providing a degree of protection against
electric shock, with isolated applied part.
This symbol on the unit means “Refer to Instructions for
use”.
Complies with EU WEEE regulations
Note: The electrical specifications are nominal and subject to variation from
the listed values due to normal production tolerances of at least 5%.