5.
Attach the electronic riser top assembly (Ref. No. 6) to the riser supports (Ref. No. 5) using four
1
/
4
”-20 x
5
/
8
”
bolts and
1
/
4
”-20
nuts, two on each end.
6.
Attach the riser to the top assembly by securing the riser end plates to the inside of both the side plate and the handle, using four
1
/
4
”-20 x
5
/
8
”
bolts and four
1
/
4
”-20
nuts on each side. Be sure that the bolts and nuts also secure through the back plate flanges
that were skipped in steps 3 and 4. Your top is now ready to be attached to your workbench body.
OPTIONAL ELECTRONIC RISER
