ASSEMBLY OF MOBILE WORKBENCH TOP
The reference numbers used throughout this sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as they are mentioned.
2.
Bolt the back rail (Ref. No. 4) to the underside of the steel top (Ref. No. 1) with two
1
/
4
”-20 x
5
/
8
”
bolts (Ref. No. 7). Attach the right
side plate (Ref. No. 2) to the side of the steel top using four
1
/
4
”-20 x
5
/
8
”
bolts. The side plate fits between the back rail end flange
and the steel top. Secure the side plate to the back rail with two
1
/
4
”-20 x
5
/
8
”
bolts and two
1
/
4
”-20
nuts (Ref. No. 8).
4.
Attach the handle (Ref. No. 3) to the steel top on the opposite side of the side plate using four
1
/
4
”-20 x
5
/
8
”
bolts. The back rail
fits between the handle and the steel top. Secure the handle to the back rail with two
1
/
4
”-20 x
5
/
8
”
bolts and two
1
/
4
”-20
nuts.
Two people are recommended for assembly. Approximate assembly time: 15-25 minutes.
Tools required: Phillips head screwdriver and a
7
/
16
”
wrench or nut driver.
NOTE: If attaching the optional riser, the riser supports will share some of the same holes with the back rail, handle and side
rail. Be sure to follow the instructions carefully throughout this sheet.
1.
Instructions refer to the top components assembly only; mobile workbench body portions are first set on assembled caster kit. See
caster kit instructions for assembly of casters.
NOTE: If attaching the optional riser, skip securing the side plate to the back rail until after the riser installation.
5.
Your top is now ready to attach to your mobile workbench body. If you purchased the optional handle power strip (Ref. No. 9),
attach that now over the handle with the included hardware. If you purchased the optional electronic riser, proceed to step 6.
NOTE: If attaching the optional riser, skip securing the handle to the back rail until after the riser installation.
