Page 6 of 16
KIT NO. 9014094
9014108 Rev. 01 (11- 2017)
Tennant Company
www.tennantco.com
2. Before mounting the ec-H2O module assembly to
machine, connect the solution hoses and ec-H2O
harness wires to module as described in following
steps (Figure 28).
Fig. 28
3. Plug the ec- H2O wire harness connector (I) into
module (Figure 29).
Fig. 29
4. Connect the ec- H2O harness wires (G, H) to cartridge
pump and pressure switch as shown (Figure 30).
Pressure
Switch
Black
Wire
White
Wire
Blue
Wires
Purple
Wires
Fig. 30
5. Connect the two routed ec- H2O solution hoses to
module as shown (Figure 30).
Clamp
[607775]
Clamp
[603654]
Fig. 31
6. Mount the ec-H2O module assembly to machine
frame with hardware as shown (Figure 32).
Clamp
[607775]
M8x1.25x20
Screw [09740]
M8x1.25x20
Sems Screw
[1020341]
Flat
Washer
[01685]
Fig. 32
7. At scrub head, connect the routed solution hose from
ec-H2O module to the solution hose manifold using
clamp as shown (Figure 33)
Clamp
[607775]
Solution hose from
ec-H2O module
Fig. 33
