64
Sentinel 9018513 (12-2018)
OPERATION
OPTIONS
HIGH PRESSURE WASHER (OPTION)
The high pressure washer can be used to clean
the machine and clean areas the machine cannot
access.
NOTE: Do NOT spray water on electrical
components when using the high pressure washer
to clean the machine.
1. Press
the
parking brake switch
to set the
parking brake.
2. Ensure the high pressure washer/wet dust
suppression water tank is
fi
lled Fill the tank
if necessary. The
fi
ll spout is located behind
the engine access door on the right side of the
machine.
WARNING: Flammable materials can
cause explosion or
fi
re. Do not use
fl
ammable materials in tank. Only use
water.
The water tank is located behind the access
door on the left side of the machine. Check the
water level on the side of the water tank.
NOTE: The hopper will not raise or tilt on an
unsafe incline for raising or tilting the hopper.
An inhibit icon appears when the hopper raise
button or hopper tilt button is pressed when the
front to back incline is more than 20% and the
side to side incline is more than 7%. See INHIBIT
INDICATORS.
RPM
MPH
3
1750
NOTE: The minimum clearance height needed to
high dump the hopper is 5060 mm (199 in).
WARNING: High dump vertical
clearance. Stay clear of overhead
obstructions and power lines.
