- 16 -
- 17 -
6.2 -TROUBLESHOOTING
FAULT
CAUSE
REMEDY
The main brush
is not spinning
The belt is broken
Replace
The reduction gear
has burnt out
Contact service
center
A wire is detached
Contact service
center
The side brush
is not spinning
The belt is broken
Replace
The battery
does not stay
charged
The liquid is
insufficient
(for lead acid
battery)
Top up
The terminal is
loose
Tighten
Dust comes
out of the fan
The filter is broken
Replace
The filter is in the
wrong position
Position correctly
The gaskets are
worn
Replace
The brushes
wear out too
quickly
The brushes are
too low
Adjust
Dust given off
while the
machine is in
operation
The flaps are worn
Replace
Clogged filter
Clean
The vacuum
motor does not
work
The motor has
burnt out
Contact service
center
The wire is
disconnected
Contact service
center
The machine
does not come
on
The battery
terminals are
disconnected
Check
The battery is
discharged
Recharge
In case of other malfunctions, contact the Authori-
zed Service Center
NOTE
6.3 -SCRAPPING THE MACHINE
In the event the machine must be scrapped, please remember that
batteries are not common waste materials. They must be disposed
of in accordance with the relevant laws.
The machine is composed of different parts. Dismantle it and pre-
pare the waste for disposal in accordance to their type.
DO NOT USE THE SCRAP PIECES AS SPARE PARTS. KEEP
SCRAPS OUT OF REACH OF CHILDREN.
