- 10 -
- 11 -
5.3 -CHARGER SETTINGS
IMPORTANT: The on-board battery charger is factory set to
accommodate a SEALED (GEL) battery. To use a WET (lead
acid) battery with the machine, the charger’s internal dip-
switches must be reconfigured as shown below. Failure to
follow these instructions will result in battery damage.
WET (lead acid) BATTERY DIPSWITCH PANEL
CONFIGURATION
SW1
SW2
ON
ON
ON
ON
OFF
OFF
OFF
OFF
DIP 1
DIP 1
DIP 2
DIP 2
SEALED (GEL) BATTERY DIPSWITCH CONFIGURATION
SW1
SW2
ON
ON
ON
ON
OFF
OFF
OFF
OFF
DIP 1
DIP 1
DIP 2
DIP 2
The DIP switches are located behind the round black cover (See
Fig. 5.3).
Fig.5.3
Fig.5.3
5.4 -CHARGER TROUBLESHOOTING AND ERROR CODES
INDICATION
MEANING
Steady red LED light
First normal charging phase
Steady yellow LED light
Second normal charging phase
Steady green LED light
Charging terminated or maintenance phase
ANOMALIES
Blinking yellow LED light
Either the wrong battery or it is not connected or there is a short circuit in
output
Blinking red LED light
Safety timer exceeded, internal short circuit
INITIAL TEST
Green LED with two blinks
Battery charger configured for charging Gel or AGM batteries
Red LED with two blinks
Battery charger configured for charging lead-acid traction batteries
