Tennant 6550D, Operator'S Manual

Page: 61 / 96

MAINTENANCE
59
6550D 330330 (3--00)
Interval Key Description Procedure
Lubricant/
Fluid
No. of
Service
Points
50 Hours 13 Main brush Rotate end-for-end -- 1
6 Fuel pipes and clamps Check for tightness and wear -- 1
100 Hours 6 Engine crankcase Change oil and filter EO 1
4 Engine fan belt Check tension -- 1
10 Hopper dust filter Check for damage, clean or re-
place
-- 1
3 Radiator Clean core exterior -- 1
Check coolant level WG 1
2 Hydraulic fluid reservoir Check fluid level HYDO 1
1 Rear tire Check pressure -- 1
8 Main brush and hopper
seals
Check for damage or wear -- 8
200 Hours 3 Radiator hoses and clamps Check for tightness and wear -- 2
15 Parking brake Check adjustment -- 1
14 Brake pedal Check and adjust travel -- 1
1 Rear wheel support bear-
ings
Lubricate SPL 2
17 Hopper bearings Lubricate SPL 2
11 Side brush guard Rotate 90
_
-- 1
400 Hours 9 Front wheel bearings Check, lubricate, and adjust SPL 2
6 Fuel filter Replace cartridge -- 1
18 Fuel tank Remove sediment -- 1
800 Hours 3 Cooling system Flush WG 1
2 Hydraulic fluid reservoir Replace hydraulic breather -- 1 y
Replace suction strainer -- 1
Change hydraulic fluid HYDO 1
5 Hydraulic fluid filter Change filter element -- 1
2 Hydraulic hoses Check for wear and damage -- 31
1 Propelling motor *Torque shaft nut -- 1
1 Rear wheel *Torque wheel nuts -- 1
16 Battery *Clean and tighten battery cable
connections
-- 1
LUBRICANT/FLUID
EO Engine oil, diesel rating above CD grade only . . . .
HYDO Tennant Company or approved hydraulic fluid .
WG Water and permanent-type ethylene glycol anti-freeze, --34
_
C (--30
_
F) . . .
SPL Special lubricant, Lubriplate EMB grease (TENNANT part no. 01433--1) . . .
NOTE: Also check procedures indicted (*) after the first 50-hours of operation.