OPERATION
Tennant 1500 (02–02)
8
CIRCUIT BREAKERS
The machine is equipped with two resetable circuit
breakers, Main (15A) and Vacuum/Drive (60A), to
protect machine from damage. If a circuit breaker
should trip, determine cause and reset breaker by
depressing circuit breaker button.
The vacuum/drive circuit breaker (60A) is designed to
stop current flow by manually pulling out the circuit
breaker button. This allows you to keep the machine
stationary while performing specific maintenance
procedures. Circuit breakers are located below control
console (Figure 9).
FIG. 9
OPTIONAL ACCESSORY TOOL SETUP
AND OPERATION
Machine is equipped with accessory tool connections.
Accessory tool enables you to reach areas that the
machine is unable, such as alcoves, stairs and corners
(See Options).
1.
Vacuum area before cleaning.
2.
Fill solution tank and add cleaning chemical (See
Filling Solution Tank).
WARNING: Flammable materials can cause
an explosion or fire. Do not use flammable
materials in tank(s).
3.
Disconnect lower vacuum hose at rear of machine
and replace with accessory vacuum hose
(Figure 10).
FIG. 10
4.
Connect solution hose to accessory tool coupler,
located at lower rear of machine (Figure 11).
FIG. 11
5.
Connect accessory tool to solution hose and
vacuum hose (Figure 12).
FIG. 12
6.
Turn on main, pump and vacuum switches.
7.
Take accessory tool and begin cleaning at top of
area and work backwards toward machine.
WARNING: Flammable materials or reactive
metals can cause explosion or fire. Do not pick
up.
