Tennant 5280 Operator And Parts Manual Download Page 5

Page: 5 / 68

OPERATION

Tennant 5280 (10--04)

6. When transporting machine:

Turn machine off.

Get assistance when lifting machine.

Do not lift machine when batteries are

installed.

Use a recommended ramp when

loading/unloading into/off truck or trailer.

Use tie--down straps to secure machine to

truck or trailer.

Put the scrub head in the lowered

position.

SAFETY LABELS

The safety labels appear on the machine in the locations indicated. Replace labels if they are missing or become

damaged or illegible.

WARNING LABEL --

Located on the recovery tank cover.

MOVING PARTS LABEL

Located on scrub head

WARNING: Spinning Brush.

Keep Hands Away. Turn Off

Power Before Working On

Machine.

READ MANUAL LABEL --

Located on control panel.

FOR SAFETY: Do not operate

machine unless operator manual

is read and understood.

Summary of Contents for 5280





































































Search results

Summary of Contents for 5280

Reviews:

Related manuals for 5280

Brands by name

Popular brands

Tennant 5280, Operator And Parts Manual

Search results

Summary of Contents for 5280

Reviews:

Related manuals for 5280

Brands by name

Popular brands