EN
OPERATION
2
Tennant 2550 (05--06)
This manual is furnished with each new model.
It provides necessary operation and maintenance
instructions.
Read this manual completely and understand the
machine before operating or servicing it.
A complete illustrated Parts List manual is also
furnished with each new model. Use the Parts List
manual to order replacement parts. Before ordering
parts or supplies, be sure to have your machine model
number and serial number available. Parts and
supplies may be ordered by phone or mail from any
authorized parts and service center, distributor or from
any of the manufacturer’s subsidiaries.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
S
The machine is operated with reasonable care.
S
The machine is maintained regularly - per the
machine maintenance instructions provided.
S
The machine is maintained with manufacturer
supplied or equivalent parts.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials,
old machine components such as
batteries, hazardous fluids such as
antifreeze and oil, in a safe
environmentally way according to your
local waste disposal regulations.
Always remember to recycle.
TENNANT N.V.
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden--The Netherlands
www.tennantco.com
Specifications and parts are subject to change without notice.
Copyright
E
2001, 2006 Tennant Company. All rights reserved.
MACHINE DATA
Please fill out at time of installation for future reference.
Model No.-
Install. Date -
Serial No.-
Richard van den Hoogen -- Technical Support Engineer
EC DECLARATION OF CONFORMITY FOR MACHINERY
(Directive 98//37/EEC, Annex II, sub A)
TENNANT N.V.
Address: Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden--The Netherlands
Model:
2550
nr.: M611373
EN
Uden/Netherlands, 26--05--04
Herewith declares, on our own responsibility, that the machinery
-- is in conformity with the provisions of the Machinery Directive (98/37/EEC), as amended
with national implementing legislation
-- is in conformity with the provisions of the E.M.C. Directive (89/336/EEC), as amended with 91/263 EEC,
92/31 EEC, 93/67EEC , 93/68 EEC
and that
-- the following (parts/clauses of) harmonized standards have been applied: EN: 292--1, 292--2, 292--3,
1050, 418, 982, 1037, 60204--1,61310--1, 61310--2, 457, 614--1, 1005--3, 563, 50081--2, 50082--2, 12895,
ISO: 3744, 3746
-- the following (parts/clauses of) national technical standards and specifications have been used: NA
