Tennant 235, Operator'S Manual

Page: 41 / 82

MAINTENANCE
3-5
235 MM166 (8--95)
No. of
Service
Interval Key Description Procedure Lubricant Points
100 Hours 1 Engine Clean or replace spark plugs -- 2
Clean or replace dry-type air -- 1
filter element
3 Dust Seals Check for damage and wear -- 6
9 Dust filter Clean or replace -- 1
15 Hydraulic reservoir Check fluid level HYDO 1
10 Thermo Sentry
t
Test -- 1
17 Rear tire Check pressure and wear -- 1
8 Front tires Inspect for wear -- 2
200 Hours 1 Engine Clean breather valve -- 1
Check crankcase ventilation -- 4
hoses, tubes and fittings
6 Vacuum fan belt Check tension -- 1
2 Hydraulic pump belt Check tension -- 1
12 Side brush lever pivot Lubricate SPL 1
14 Parking brake Check adjustment -- 1
16 Rear wheel support Lubricate SPL 1
bearing
13 Steering linkage Lubricate SPL 2
400 Hours 1 Engine Check and adjust idle speed -- 1
Clean carbon deposits -- 2
Check valve clearance -- 4
Check starter motor brushes -- 1
15 Hydraulic fluid reservoir Change hydraulic fluid HYDO 1
7 Hydraulic fluid filter Change filter element -- 1
800 Hours 17 Rear wheel Torque wheel nuts -- 1
EO -- Engine oil
HYDO -- TENNANT or approved hydraulic fluid
SPL -- Special lubricant, Lubriplate EMB grease (TENNANT part number 01433--1)
NOTE: More frequent intervals may be required in extremely dusty conditions.