Tennant 235, Operator'S Manual

Page: 30 / 82

OPERATION
235 MM166 (3--93)
2-12
TO STOP MACHINE
1. Return the directional pedal to the “neutral”
position. Apply the brake.
2. Push the main brush lever into the “UP”
position.
3. Pull the side brush lever back into the
“Raised”position.
4. Pull the side brush and hopper lever into the
“LOWER”position to stop the side brush.
5. Place the throttle control lever in the “IDLE”
position.
6. Set the machine parking brake.
7. Turn the key-operated ignition switch key to
the “OFF”position. Remove the key from
the ignition switch.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, Turn Off Machine And Remove Key.
8. LPG powered machines: Close the LPG
tank service valve.
POST OPERATION CHECKLIST -- ENGINE
STOPPED
Check the skirts for damage, wear, and
adjustment.
Check for wire or string tangled on the brushes.
Check to make sure LPG tank service valve is
closed.
Check for LPG odor or frost on LPG hoses and
components, indicating a leak.
Check for leaks.
TO ENGAGE HOPPER SUPPORT BAR
WARNING: Raised Hopper May Fall.
Engage Hopper Support Bar.
1. Set the machine parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, Turn Off Machine And Remove Key.
2. Raise the hopper.
3. Position the hopper support bar on the bar
stand.
B
A
03369
HOPPER SUPPORT BAR STAND
A. Bar Stand
B. Support Bar