Tenmars TM-6002, User Manual

Page: 6 / 22

TM-6002
EN-6
1. LCD display.
2. PASS LED
：
To indicate the tested battery complies with the high limit of
comparator.
3. WARNING LED
：
To indicate the tested battery is going to deteriorate.
4. FAIL LED
：
To indicate the tested battery has deteriorated.
5. key
：
Comparator function.
6. key
：
Average function.
7. key
：
To show the data logged readings
.
8. key
：
To delete single data logged reading in the memory and
settings date/time
.
9. key
：
Select the impedance range. (40mΩ, 400mΩ, 4Ω, 40Ω)
10. key
：
Select the voltage range. (4V, 40V)
11. key
：
Power ON/OFF.
12.
HOLD
key
：
Hold or disable -hold function for the displayed values.
13. key
：
Turn the beeper on or off
14. key
：
For recording the displayed values.
15. key
：
For implementing the zero-adjust feature.
16. key
：
Select the auto-hold and auto-memory feature.
17. key
：
For configuration settings and changing their values.
18. key
：
To set the configuration with entering values.
19. SOURCE
＋
input jack
：
For connecting with the red test lead plug.
20. SOURCE
－
input jack
：
For connecting with the back test lead plug.
21. SENSE
＋
input jack
：
For connecting with the yellow test lead plug.
22. SENSE
－
input jack
：
For connecting with the blue test lead plug.
23. TEMPSENSOR input jack
：
For connecting the plug of the temperature
sensor.
24. DCA
＋
input jack
：
For connecting with the red test lead plug to current
probe.
25. DCA
－
input jack
：
For connecting with the back test lead plug to current
probe.
26. USB interface
：
Used for connecting the USB cable.
27. DC input jack
：
Used for connecting the external power DC 9V input.
4. Electrical specifications:
To ensure accuracy the ambient temperature should be 23
°
C
±
5
°
C
with a humidity of 80% RH (maximum) non-condensing. In addition,