Tenmars TM-6002, User Manual

Page: 12 / 22

TM-6002
EN-12
conditions to light the corresponding LED, and sounds a beeper under the
WARNING and FAIL cases.
1. Press power: key turn on the meter
.
2. Press comp key for 2 seconds the display will show ”COMP” and
No ” 00” .Each flashing to enter the comparator setting mode.
3. Use the up key or down key to select the desired comparator
number form 01
up
to 99.
4. Press left or right key to select option to adjust comparator low limit
resistance and low limit voltage mode or select option to adjust comparator
high limit resistance mode or select option to adjust comparator voltage
and current mode.
5. If select option to adjust comparator high limit resistance mode, Press
comp key to display will blink ”COMP” to enter comparator setting if
high limit resistance.
6. Press Ω-RANGE key to select high limit resistance range.
7. Press left or right key to select option to adjust comparator high limit
resistance
8. Press up key or down key to change the digit.
9. If you select option to adjust comparator low limit resistance and low limit
voltage mode of step 5.
10. Press comp key to display will blink ”COMP” to enter comparator
setting if low limit resistance and low limit voltage mode.
11. Press Ω-RANGE key to select low limit resistance range. or Press
V-RANGE key to select low limit voltage range.
12. Press left or right key to select option to adjust comparator low limit
resistance and voltage
13. Press up key or down key to change the digit.
14. If you select option to adjust comparator voltage and current mode of step
5.
15. Press comp key to enter comparator setting voltage and current
mode
16. Press V-RANGE key to select low limit voltage range
17. Press left or right key to select option to adjust comparator voltage
and current.
18. Press up key or down key to change the digit.
19. Press key to store the setup, exit the mode