4.
To print, press the PRINT button. To abort a printout before it is complete,
press ABT.
APPENDIX A
Printer Paper Change
(1)
Remove the printer cover by lifting at the front and disengaging the tab at the
rear of the cover.
(2)
Pull forward on the small lever located on the right of the printer in front of
the rubber roller. This will release any paper remaining in the printer.
(3)
Remove the old spool from the printer.
(4)
Place the new spool in the printer, orienting it so that the paper unwinds from
underneath as it leaves the spool. (This is thermal paper; if you do not have the
correct side facing the printer, nothing will be printed on the paper.)
(5)
Insert the paper underneath the rubber roller from behind. (This is easier if the end
of the paper is cut so that it tapers to a point.)
(6)
The paper will emerge at the top of the rubber roller, aiming back. Pull
out several inches of paper.
(7)
Push the small lever back to engage the rubber roller against the paper. (The
paper will not feed unless the roller is engaged.) Caution: Do not pull on the paper
once the roller is engaged.
(8)
Carefully replace the cover, threading the paper through the slot.
