700-0007-000 Rev.0
Pag. 9
Tenco Srl
Via Arbora 1
16036 Avegno
(GE)
Tel. +39 0185 79556
E.mail
FOUR NOZZLES VACUUM FILLING MACHINE
CHAPTER 5 – REFERENCE STANDARDS
Statutory Regulations
-
European Directive on Electromagnetical Compatibility n° 2004/108/CE
-
Law n° 791, dd. 18/10/1977 - Transposition of the Community Directive (DB) (73/23/EEC) on electrical equipment
safety assurance.
-
Decree Law n° 626, dd. 25/11/1996 - Transposition of the directive 93/68/EEC on CE marking for electrical
equipment to be used within specific voltage ranges.
Voluntary Regulations
-
EN 60335-1 (1989 - Safety on household elecrical appliances and similar appliances.
-
General provisions (IEC 335-1/1/1976).
CHAPTER 6 - WARRANTY
The Manufacturer guarantees that the equipment to which these documents refer has been tested and that the
established test results have been achieved.
The warranty period shall last 12 months, beginning on the date of delivery of the equipment (as indicated in the
transport document), except as otherwise agreed upon between the Parties.
The Manufacturer guarantees the equipment to be free from defects in materials and workmanship. Damage deriving
from transport not carried out by transport means of the Manufacturer, from improper maintenance, failure of electrical
equipment, improper use or negligence, or adjustments/repairs carried out by service personnel not duly authorized by
the Manufacturer or in any case beyond the control of the Manufacturer shall NOT be covered by this warranty.
The warranty cannot be transferred by the initial owner of the product to third parties.
During the applicable warranty period, the Manufacturer will repair or replace free of charge any warranted parts that
prove defective. For these operations to be carried out, the equipment shall have to be transported to the Manufacturer,
who shall not be responsible for any transport charges.
The Manufacturer shall not repair the equipment during the warranty period at the Customer's premises, except as
otherwise agreed upon between the Parties.
After the above specified period, this warrantee shall expire
The Manufacturer shall in no event be liable for any direct, consequential, incidental, indirect or special damages caused
to people or property by original defects of the equipment, equipment failure, or subsequent forced stoppage in the use
of the equipment.
The Manufacturer shall not be liable for filling defects if, at the time of equipment construction, the Client has failed to
provide a full sampling of containers and products required in order to carry out the necessary tests.
