Please input the correct user’s name and password in the log in window of this software,
and press “Connect” and then you will be able to dial up. After identification of user’s
name and password, you will be able to connect to the Internet.
Note: Please consult your ADSL service provider for the Internet information before
installing this ADSL modem.
VPI (Virtual Path Identifier)
VCI (Virtual Channel Identifier)
Packing format, Modulate mode, Protocol mode
This TED8620B ADSL modem is integrated with 31 groups of VPI/VC parameters, as
follows:
8/81 0/100 8/88 8/34 0/101 0/36 0/34 0/102 8/38 0/127 0/104 1/100 0/40 1/40
0/39 8/40 8/37 0/103 0/105 0/200 0/37 130/32 8/33 0/33 8/36 1/32 1/33
8/35 0/35 8/32 0/32
4. FAQ
4.1 Is ADSL able to support share of Internet Access to Internet in LAN?
Answer: Yes. And there are three methods to do this.
a. Choose the Internet share software which support ADSL, and please also pay attention
to the sequence of installing the software. You should first install the PPPoE software and
then the Internet share software like Sygate. The integrated ICS share of of Windows
2000 and Windows 98 second version both support ADSL. Or you can set the host which
is directly connect to ADSL as Proxy Server., and then the clients in LAN will have access
to the external sources through this Proxy Server. Advantage of this is that you just need
to apply for one ADSL account or require only one IP address. Client in LAN can use the
reserved IP Address.
b. Use the method of special line. Apply IP addresses for all computers in the LAN.
Advantages of this is that you don’t need to configure an extra Proxy Gateway,
disadvantages is that due to the current technical shortage, the ISP can offer limited IP
address to LAN.
c. Connect a Router behind the ADSL modem, apply a series of IP addresses for
computers in LAN from the ISP. When these IP addresses are routed by the ISP, the
computer will be able to connect to the Internet. Advantages of this method is that the
number of computer is not limited ,but you need to equipt an extra computer.
4.2 How to set and obtain dynamic IP for LAN users?
Answer: Take Win 98 for example: Open the ”Change a setting”, find Network, double
click and open Network Properties, select TCP/IP protocol, open Properties of TCP/IP
protocol, select the IP address obtainment mode as “Automatic Obtainment of IP address”,
press enter, and then reset the computer. Then it will be ok.
