24
EN
ASSEMBLY
•
Push the silicone rubber plug into the opening at the bottom of the juicing bowl, checking that it is fixed
correctly in place beyond the retainer tooth [Fig. B].
• Place the juicing container on the motor body, making sure the arrow lines up with the one on the
motor body [Fig. C].
•
Place the selected filter inside the mixer [Fig. D], aligning the red dot on the filter with the red dot on
the upper edge of the juicing container [Fig. E].
NOTE: if you decide to use the sorbet accessory, this operation must not be performed.
NOTE: if you want to obtain denser and thicker juice, use the wide mesh filter. This filter
does not produce any waste, which is why the extracted juice is denser.
•
Insert the auger into the filter by pressing and gently turning completely until a click is heard [Fig. F].
NOTE: the cover cannot be fitted on if the reamer is not completely
inserted in position.
• Place the hopper on the juicing container, aligning the red dot on the hopper with the red dot on the
upper edge of the juicing container [Fig. G], then turn it clockwise until completely closed [Fig. H].
USE
WARNING! Comply with the indications in the chapters "Food
contact" and "Quantity and usage time".
WARNING! DO NOT use this appliance if there are visible
signs of damage
.
WARNING! DO NOT touch the moving parts.
WARNING! DO NOT use the appliance empty.
WARNING! DO NOT open the lid when the motor is on.
