Temsa TS 35, Electronics And Wiring Manual

Page: 15 / 257

TEMSA Note:
00
00A-10 TS35
00.1.8 Possible failure causes for KIBES 32 products
CAUTION
- Welding on the vehicle when KIBES-32 products are connected to the harness of
the vehicle
- Vehicle has been struck by lightning
- ESD (electro-static discharge) by touching of connector pins by a person without
protection
against ESD (e.g. ESD shoes)
- Exchange of KIBES-32 product during connection to power.
(Before exchange, the KIBES-32 product has to be disconnected from power [e.g.
switch off
battery])
- Overstress of outputs of KIBES-32 products.
Some examples on base of the MUX2-B or MUX2-M are described below.