Installation Overview
Installation Overview
The installation procedure in this guide applies to the following for TEMPUR-Choice
™
Supreme and
TEMPUR-Choice
™
Luxe mattresses:
• TEMPUR-Choice
™
Supreme or Luxe mattress installed on an existing bed frame.
• TEMPUR-Choice
™
Supreme or Luxe mattress installed on a matching Tempur-Pedic foundation (high or low
profile).
• TEMPUR-Choice
™
Supreme or Luxe mattress installed on a TEMPUR-Ergo
™
Premier adjustable base.
Refer to the
TEMPUR-Ergo
™
Premier Complete Reference Guide
for details on adjustable base installation.
The TEMPUR-Choice
™
Supreme or Luxe mattresses sizes are listed in the following table:
Mattress Size
Components
Twin Long
(one multi-zone Air Chamber Assembly)
Includes one Pump Assembly and one Remote Control.
Two built-in hoses are also included.
Split King
(two individual multi-zone Air Chamber
Assemblies)
Includes two Pump Assemblies and two remote controls. Split
Kings consist of two Twin Long mattresses placed side-by-side.
Complete the assembly of one mattress, assemble the second,
and then place them together on your bed frame. Four built-in
hoses are also included (two hoses in each mattress).
NOTE: Optionally, you can use only one Pump Assembly if
desired.
Queen, California King, and King
(two multi-zone Air Chamber
Assemblies)
Includes one Pump Assembly and two Remote Controls. Four
built-in hoses are also included.
The Installation section on page 6 explains the installation procedures for these mattress sizes on an existing bed
frame, matching Tempur-Pedic foundation, or Tempur-Pedic adjustable base.
CUSTOMER SERVICE: 1–800–821–6621
5
