TEMPUR-Choice
™
NOTE: If you have a TEMPUR-Choice
™
Twin Long mattress, it has only one remote
control. Connect the remote control to the
LH (left hand) input in the rear of the Pump
Assembly to operate properly with the nozzles.
STEP 8
Unbox the power cord and connect it into the power
supply.
STEP 9
Connect the power supply DC output connector to
the DC12V input socket in the rear of the Pump
Assembly.
STEP 10
Connect the power cord plug to a surge protector
and plug the surge protector into a wall outlet.
Ensure the power switch on the surge protector is in
the “on” position.
NOTE: It is recommended that you use a surge
protector to guard against unexpected power
surges.
STEP 11
Test and make sure the remote controls and Pump
Assembly are working properly.
STEP 12
Press the
medium
button once on the remote
controls. Air will discharge from the nozzles on the
Pump Assembly and the remote controls remain lit.
The MED letters on the screen blink and then the
remote controls turn off.
STEP 13
Once you confirm the remote controls and
Pump Assembly are working properly, go to the
“Installation” section on page 6 for details on setting
up your TEMPUR-Choice
™
mattress.
4
CUSTOMER SERVICE: 1–800–821–6621
